Design & Planning
Architectural Drawings for Loft Conversions
Measure first. Draw from fact, not assumption.
Every approval, structural calculation, and builder's price starts from the same place: accurate drawings of your house. We measure it as it stands today, draw what it is, then draw the loft you want. Packages from £1,495 + VAT.
- From £1,495
- Measured survey + proposed drawings, excl. VAT
- 5 drawing types
- Floor plans, elevations, sections, roof plan, site plan
- Submission-ready
- Drawn to 1:50 or 1:100 — accepted by all London councils
- Two uses
- Same drawing set supports both PD and planning routes
Five kinds of drawing, five different jobs
A loft conversion is not described by one drawing. Each type answers a different question for a different reader — the council, the structural engineer, building control, and your builder. Tap through them to see what each one shows.
Illustration, not to scale
Floor plans
A view from above, as if the roof were lifted off. It fixes the size of each room, where the staircase lands, where the walls, doors and windows go, and how the new floor connects to the one below.
Who relies on it
- You, to judge how the space will live
- The council, when it reviews an application
- Building control, for the stair and escape route
Why it matters: The stair position is settled here first, because it decides how much of the loft you can actually use.
Why every set shows the house twice
Every drawing set shows the house as it is now — and as it will be after the conversion. The council compares the two to see exactly what changes. The permitted development volume allowance is measured against the existing roof, not the proposed one. The “existing” drawings must be accurate.
Drag across the drawing below to see a terraced house before and after a rear dormer.
Drag across the drawing, or use the arrow keys. Illustration, not to scale.
Where a few centimetres change the answer
Three of the limits that shape a loft conversion depend directly on measured dimensions. Estimates are not good enough — which is why drawings always start with a survey.
Roof volume allowance
A dormer under permitted development can add only so much volume to the roof. It is calculated from measured dimensions, so the survey determines how large a dormer is actually permitted — not an approximation.
Rear dormer loft conversions2.4 mRidge height for a rooflight loft
As a guide, 2.4 metres or more from ceiling to ridge works well. Below about 2.2 metres, the new floor and insulation leave too little standing room. Only a measurement tells you which side you are on.
Standard rooflight conversions1.9 mHeadroom over a loft stair
A loft stair needs 1.9 metres of headroom at the centre, reducing to 1.8 metres at the side. Whether the stair fits depends on exactly where it lands and how much height is available above it.
Building regulationsFrom survey to submission
Five stages, each one building on the last. Which ones you need depends on the package you choose.
View all design packages- 1
Measure the house
A full measured survey records the footprint, the roof, the ridge height, the floor levels and the existing staircase. Everything after this is drawn from these measurements.
Packages 2, 3 and 5
- 2
Draw what exists
The survey becomes a set of plans, elevations and sections of the house as it stands today. This is the base that every proposed change is drawn on top of.
Packages 2, 3 and 5
- 3
Design the loft
The layout, the staircase position, the size and position of the dormer and the windows are drawn up and discussed with you, so you can see the loft before anything is built.
Package 3 includes a design consultation
- 4
Prepare for approval
The drawings are issued in the form the route needs: a Lawful Development Certificate application under permitted development, or a full planning application.
Packages 2, 3 and 5
- 5
Add the technical detail
For building control, the drawings gain construction detail, structural calculations and steelwork design, so the build can be priced and started.
Packages 4 and 5
Drawing questions
Not sure what your house needs? Tell us your address and we will point you to the right starting point.
Ask a design specialistWhy do you measure the house when I already have the original plans?
Plans from when a house was bought or built are often old, drawn at an unknown scale, or don't show later alterations. A measured survey records the house as it stands today, and every approval and structural calculation depends on those dimensions being right.
Do I need drawings for permitted development?
Yes. Permitted development means you do not need planning permission, but a Lawful Development Certificate application still includes drawings of the existing and proposed house. That is why the permitted development package includes a full measured survey and proposed architectural drawings.
How are planning drawings different from building regulations drawings?
Planning drawings show what the loft will look like and how it sits within the house and the street. Building regulations drawings show how it is built: the structure, the fire escape route, the insulation and the staircase. They are prepared for different approvals, so they are different sets.
How is the feasibility sketch different from a full set of drawings?
The feasibility package includes an indicative layout sketch. It shows what is likely to work so you can decide whether to go ahead. It is not a measured, submission-ready drawing set. The measured survey and proposed drawings come with the permitted development and planning packages.
What scale are the drawings?
Planning drawings are drawn to recognised metric scales. Plans and elevations are normally 1:50 or 1:100, a block plan 1:200 or 1:500, and a location plan 1:1250 or 1:2500.
After the drawings, the approvals
Get Started Today
Check Your Property & Get Your Loft Conversion Quote
Use our free property checker or speak directly with our team. We respond to all enquiries within one working day.